gran/hertz/history
When I use gran/hertz/history with friction_damp_flag=1 but coefficientFriction=0 I got torque!=0 (but history=0). Is this bug or not?
ps. It is for liggghts 1.5
(Possible) bugs / suspicious behavior should be reported as a new thread here, not in the user forum. This should give both you and the developers a clear idea about the status of your bug report (submitted/assigned/fixed)
When I use gran/hertz/history with friction_damp_flag=1 but coefficientFriction=0 I got torque!=0 (but history=0). Is this bug or not?
ps. It is for liggghts 1.5
Hi,
I'm new to liggghts and CFDEM. I've just installed liggghts and CFDEM according to setup_LIGGGHTS__OpenFoamR_CFDEM_2p0_on_Ubuntu1004_24052011.txt, and that's OK.
So, I try to run the example case, settlingTestMPI. However, it failed and it showed "FOAM Fatal Error":
[1] --> FOAM FATAL ERROR:
[1] index -1 out of range 0 ... 3999
[1]
[1] From function UList::checkIndex(const label)
[1] in file /home/cfd/OpenFOAM/OpenFOAM-1.7.1/src/OpenFOAM/lnInclude/UListI.H at line 109.
[1]
FOAM parallel run aborting
[1]
Hello,
I think there are some problems with the way rolling friction is calculated in pair_gran_hooke_history.cpp .
Hello, I found some strange behavior regarding the way the rolling friction torque is calculated.
I use a lattice command to create the particles. Then they are in contact, but there is no shear at all in the first step.
This is the code used to create the particles:
lattice fcc 0.01414213562
region cil cylinder y 0 0.01 0.79 0 0.1 units box
region res prism -1.1 1.1 0.01 0.79 -1.1 -0.20 0.0 0.0 0.0 units box
region part intersect 2 cil res units box
create_atoms 1 region part units box
group myPart region part
set group myPart diameter 0.01
Hi everybody,
I found the following error message in liggghts version 1.4.5 as well in 1.4.4. I run a case with 209301 particles and 3 particle types on 8 cores (error message doesnt seem to depend on the number of cores). As pair style I use gran/hooke/history/stiffness 0 0. After setting up the case I get the following error:
IGGGHTS 1.4.5 based on lammps-10Mar10
Reading data file ...
orthogonal box = (-0.111 -0.111 0) to (0.111 0.111 0.039)
2 by 4 by 1 processor grid
209301 atoms
18118 atoms in group boundary
179086 atoms in group particle
Setting up run ...
I just came across this, and assume it's a bug: if you have more than one check/timestep/gran fix in a simulation (with the same fix ID, or different) and one call is before a wall/mesh/gran fix, and the other after, the sim crashes.
In my case when I try to pour particles:
[comp-l08:07286] *** Process received signal ***
[comp-l08:07286] Signal: Segmentation fault (11)
[comp-l08:07286] Signal code: Address not mapped (1)
[comp-l08:07286] Failing at address: (nil)
[comp-l08:07286] [ 0] /lib/libpthread.so.0(+0xf8f0) [0x7f52735598f0]
Bug description:
Fix insert stream throws an error "ERROR: Fix insert/stream command requires a planar face for insertion" even if the insertion face is planar
Applies to:
LIGGGHTS 1.3 - 1.4.4
Comments:
none
Reported by:
Sergei Dorofeenko (Russian Academy of Science), Christoph Goniva (JKU), Alice Hager (JKU), Simon Wallner (Vienna UT)
Status :
(7 Oct 2011): Pending
(11 Oct 2011): Bug found, fixed in 1.4.5
When I run examples/LIGGGHTS/insert_stream with lmp_openmpi I got error (while run with lmp_serial is ok):
...
Importing STL file 'face.stl'
Solid body detected in STL file
End of solid body detected in STL file.
Mesh calculations running. This may take a while...finished!
Import of 86 triangles completed successfully!
0 atoms in group nve_group
ERROR: Fix insert/stream command requires a planar face for insertion
There is a bug in the harmonic option for fix_wall_region.cpp as discussed in the following thread
"http://lammps.sandia.gov/threads/msg19287.html"
The code for void FixWallRegion::harmonic(double r) should be changed to
void FixWallRegion::harmonic(double r)
{
double dr = cutoff - r;
fwall = 2.0*epsilon*dr;
eng = epsilon*dr*dr;
}
The latest version of the lammps code has the patch in place but its missing in the liggghts code.
Bug description:
fix insert/stream crashes with segfault if more than one insertion face is used
Applies to:
LIGGGHTS 1.4, 1.4.1
Comments:
Only applies for cases where more than one insertion face is used
Reported by:
Timo Kulju, Oulu University Finland
Status :
(31 August 2011): Implemented a possible remedy that will be part of the next release 1.4.2
(8 Sept 2011): Fix released in 1.4.2, waiting for user feedback if the bug has vanished