erreos when running CFDEM

Submitted by flamelet on
Attachment Size
cfdem-error.txt 10.28 KB
cgoniva

Hi!

do you still encounter this error?
could you please run the case with debug flag on (in parCFDEMrun.sh) and post the error statement?

Cheers,
Chris

Tue, 28 Feb 2012 - 12:39 Permalink
flamelet

In reply to by anonymous_stub (not verified)

Hi Chris,

I've run the case again with debug on. The error statement is listed below.

Thanks,
Lee
------------------------------------------------------------------------------------
cfd@ubuntu:~/OpenFOAM/cfd-1.7.1/run/cfdemSolverPiso_shared/cfdemSolverPisoCase_shared/settlingTestMPI/CFD$ decomposePar
/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 1.7.1 |
| \\ / A nd | Web: www.OpenFOAM.com |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : 1.7.1-03e7e056c215
Exec : decomposePar
Date : Feb 28 2012
Time : 20:21:34
Host : ubuntu
PID : 27574
Case : /home/cfd/OpenFOAM/cfd-1.7.1/run/cfdemSolverPiso_shared/cfdemSolverPisoCase_shared/settlingTestMPI/CFD
nProcs : 1
SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Time = 0
Create mesh

Calculating distribution of cells
Selecting decompositionMethod simple

Finished decomposition in 0.3 s

Calculating original mesh data

Distributing cells to processors

Distributing faces to processors

Calculating processor boundary addressing

Distributing points to processors

Constructing processor meshes

Processor 0
Number of cells = 4000
Number of faces shared with processor 1 = 400
Number of processor patches = 1
Number of processor faces = 400
Number of boundary faces = 1200

Processor 1
Number of cells = 4000
Number of faces shared with processor 0 = 400
Number of processor patches = 1
Number of processor faces = 400
Number of boundary faces = 1200

Number of processor faces = 400
Max number of processor patches = 1
Max number of faces between processors = 400

Processor 0: field transfer
Processor 1: field transfer

End.

cfd@ubuntu:~/OpenFOAM/cfd-1.7.1/run/cfdemSolverPiso_shared/cfdemSolverPisoCase_shared/settlingTestMPI/CFD$ mpirun -np 2 cfdemSolverPiso_shared -parallel
/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 1.7.1 |
| \\ / A nd | Web: www.OpenFOAM.com |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : 1.7.1-03e7e056c215
Exec : cfdemSolverPiso_shared -parallel
Date : Feb 28 2012
Time : 20:22:09
Host : ubuntu
PID : 27581
Case : /home/cfd/OpenFOAM/cfd-1.7.1/run/cfdemSolverPiso_shared/cfdemSolverPisoCase_shared/settlingTestMPI/CFD
nProcs : 2
Slaves :
1
(
ubuntu.27582
)

Pstream initialized with:
floatTransfer : 0
nProcsSimpleSum : 0
commsType : nonBlocking
SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

Reading field p

Reading physical velocity field U
Note: only if voidfraction at boundary is 1, U is superficial velocity!!!

Reading momentum exchange field Ksl

Reading voidfraction field voidfraction = (Vgas/Vparticle)

Creating dummy density field rho = 1

Reading particle velocity field Us

Reading/calculating face flux field phi

Selecting incompressible transport model Newtonian
Selecting turbulence model type RASModel
Selecting RAS turbulence model laminar

Reading g
Selecting locateModel standard
Selecting dataExchangeModel twoWayMPI
Starting up LIGGGHTS for first time execution
Executing input script '../DEM/in.liggghts_init'
LIGGGHTS 1.5 based on lammps-10Mar10

# Pour granular particles into chute container, then induce flow

atom_style granular
atom_modify map array sort 0 0
communicate single vel yes
#processors 1 1 2

boundary f f f
newton off

units si

region reg block 0 0.1 0 0.1 0 0.1 units box
create_box 1 reg
Created orthogonal box = (0 0 0) to (0.1 0.1 0.1)
2 by 1 by 1 processor grid

neighbor 0.003 bin
neigh_modify delay 0 binsize 0.01

#Material properties required for new pair styles

fix m1 all property/global youngsModulus peratomtype 5.e6
fix m2 all property/global poissonsRatio peratomtype 0.45
fix m3 all property/global coefficientRestitution peratomtypepair 1 0.3
fix m4 all property/global coefficientFriction peratomtypepair 1 0.5
fix m5 all property/global characteristicVelocity scalar 2.0

#pair style
pair_style gran/hooke 1 0 #Hookean without cohesion
pair_coeff * *

#timestep, gravity
timestep 0.00001
fix gravi all gravity 9.81 vector 0.0 -1.0 0.0

#walls
fix xwalls all wall/gran/hooke 1 0 xplane 0.0 0.1 1
fix ywalls all wall/gran/hooke 1 0 yplane 0 0.1 1
fix zwalls all wall/gran/hooke 1 0 zplane 0 0.01 1

#-import mesh from cad:
#fix cad1 all mesh/gran hopperGenauerSALOME.stl 1 1.0 0. 0. 0. 0. 180. 0.

#-use the imported mesh as granular wall
#fix bucket_wall all wall/gran/hertz/history 1 0 mesh/gran 1 cad1

#particle insertion

#- distributions for insertion using pour
#fix pts1 all particletemplate/sphere 1 atom_type 1 density constant 2500 radius constant 0.001
#fix pts2 all particletemplate/sphere 1 atom_type 1 density constant 2500 radius constant 0.002
#fix pdd1 all particledistribution/discrete 1. 2 pts1 0.3 pts2 0.7
#variable alphastart equal 0.05
#region bc block 0.01 0.09 0.05 0.09 0.001 0.009 units box
#fix ins all pour/dev/packing 1 distributiontemplate pdd1 vol ${alphastart} 200 region bc

#- create single partciles
#create_atoms 1 single 0.05 0.04 0.05 units box
create_atoms 1 single 0.05 0.04 0.046 units box
Created 1 atoms
set group all diameter 0.0001 density 3000
Setting atom values ...
1 settings made for diameter
1 settings made for density

#cfd coupling
fix cfd all couple/cfd/force couple_every 100 mpi
INFO: nevery as specified in LIGGGHTS is overriden by calling external program
#fix cfd all couple/cfd/force couple_every 100 file ../CFD/couplingFiles/

variable vx equal vx[1]
variable vy equal vy[1]
variable vz equal vz[1]
variable time equal step*dt
fix extra all print 100 "${time} ${vx} ${vy} ${vz}" file ../DEM/post/velocity.txt title "%" screen no

#apply nve integration to all particles that are inserted as single particles
fix integr all nve/sphere

#screen output
compute 1 all erotate/sphere
thermo_style custom step atoms ke c_1 vol
thermo 1000
thermo_modify lost ignore norm no
compute_modify thermo_temp dynamic yes

#insert the first particles so that dump is not empty
#dump myDump all stl 1 post/dump.stl
run 1
Setting up run ...
Memory usage per processor = 2.54746 Mbytes
Step Atoms KinEng 1 Volume
0 1 0 0 0.001
1 1 0 0 0.001
Loop time of 0.00010748 on 2 procs for 1 steps with 1 atoms

Pair time (%) = 2.06754e-06 (1.92365)
Neigh time (%) = 0 (0)
Comm time (%) = 3.50224e-05 (32.585)
Outpt time (%) = 2.08946e-05 (19.4405)
Other time (%) = 4.94955e-05 (46.0509)

Nlocal: 0.5 ave 1 max 0 min
Histogram: 1 0 0 0 0 0 0 0 0 1
Nghost: 0.5 ave 1 max 0 min
Histogram: 1 0 0 0 0 0 0 0 0 1
Neighs: 0 ave 0 max 0 min
Histogram: 2 0 0 0 0 0 0 0 0 0

Total # of neighbors = 0
Ave neighs/atom = 0
Neighbor list builds = 0
Dangerous builds = 0
dump dmp all custom 1000 ../DEM/post/dump.liggghts_init id type type x y z ix iy iz vx vy vz fx fy fz omegax omegay omegaz radius
#undump myDump

#force : f_couple_cfd[0] f_couple_cfd[1] f_couple_cfd[2]
#node : f_couple_cfd[6]
#cell id : f_couple_cfd[7]

run 1 upto #MPI coupling
Setting up run ...
Memory usage per processor = 2.77634 Mbytes
Step Atoms KinEng 1 Volume
1 1 0 0 0.001
Loop time of 8.44628e-06 on 2 procs for 0 steps with 1 atoms

Pair time (%) = 0 (0)
Neigh time (%) = 0 (0)
Comm time (%) = 0 (0)
Outpt time (%) = 0 (0)
Other time (%) = 8.44628e-06 (100)

Nlocal: 0.5 ave 1 max 0 min
Histogram: 1 0 0 0 0 0 0 0 0 1
Nghost: 0.5 ave 1 max 0 min
Histogram: 1 0 0 0 0 0 0 0 0 1
Neighs: 0 ave 0 max 0 min
Histogram: 2 0 0 0 0 0 0 0 0 0

Total # of neighbors = 0
Ave neighs/atom = 0
Neighbor list builds = 0
Dangerous builds = 0
#run 15000 upto #file coupling
#write_restart liggghts.restart
Selecting voidFractionModel centre
centreVoidFraction constructor done
Selecting averagingModel dilute
Selecting regionModel allRegion
Selecting meshMotionModel noMeshMotion

cfdem version: cfdem-2.3.0-beta-2011-12-05-13:51

If BC are important, please provide volScalarFields -imp/expParticleForces-
Selecting forceModel DiFeliceDrag
Selecting forceModel Archimedes
accounting for Archimedes on DEM and CFD side!
Selecting momCoupleModel implicitCouple

Selecting liggghtsCommandModel execute ,provide dicts, numbered from 0 to n
liggghtsCommand run 100
firstCouplingStep = 1
lastCouplingStep = 1000000000
couplingStepInterval = 1
solving volume averaged Navier Stokes equations of type B

Starting time loop

Time = 0.001

Courant Number mean: 0 max: 0
- evolve()
Starting up LIGGGHTS
Executing command: 'run 100 '
run 100 Setting up run ...
Memory usage per processor = 2.77634 Mbytes
Step Atoms KinEng 1 Volume
1 1 0 0 0.001
101 1 0 0 0.001
Loop time of 0.015447 on 2 procs for 100 steps with 1 atoms

Pair time (%) = 9.25697e-05 (0.599275)
Neigh time (%) = 0 (0)
Comm time (%) = 0.000393073 (2.54466)
Outpt time (%) = 2.0978e-05 (0.135807)
Other time (%) = 0.0149403 (96.7203)

Nlocal: 0.5 ave 1 max 0 min
Histogram: 1 0 0 0 0 0 0 0 0 1
Nghost: 0.5 ave 1 max 0 min
Histogram: 1 0 0 0 0 0 0 0 0 1
Neighs: 0 ave 0 max 0 min
Histogram: 2 0 0 0 0 0 0 0 0 0

Total # of neighbors = 0
Ave neighs/atom = 0
Neighbor list builds = 0
Dangerous builds = 0
LIGGGHTS finished

timeStepFraction() = 1
[1]
[1]
[1] --> FOAM FATAL ERROR:
[1] index -1 out of range 0 ... 3999
[1]
[1] From function UList::checkIndex(const label)
[1] in file /home/cfd/OpenFOAM/OpenFOAM-1.7.1/src/OpenFOAM/lnInclude/UListI.H at line 109.
[1]
FOAM parallel run aborting
[1]
[1] #0 Foam::error::printStack(Foam::Ostream&) at ~/OpenFOAM/OpenFOAM-1.7.1/src/OSspecific/POSIX/printStack.C:202
[1] #1 Foam::error::abort() at ~/OpenFOAM/OpenFOAM-1.7.1/src/OpenFOAM/lnInclude/error.C:230
[1] #2 Foam::Ostream& Foam::operator<< (Foam::Ostream&, Foam::errorManip) at ~/OpenFOAM/OpenFOAM-1.7.1/src/OpenFOAM/lnInclude/errorManip.H:86
[1] #3 Foam::UList::checkIndex(int) const at ~/OpenFOAM/OpenFOAM-1.7.1/src/OpenFOAM/lnInclude/UListI.H:113
[1] #4 Foam::UList::operator[](int) const at ~/OpenFOAM/OpenFOAM-1.7.1/src/OpenFOAM/lnInclude/UListI.H:172
[1] #5 Foam::Archimedes::setForce(double** const&, double**&, double**&, double**&) const at ~/OpenFOAM/cfd-1.7.1/src/lagrangian/cfdemParticle/subModels/forceModel/Archimedes/Archimedes.C:118
[1] #6 Foam::cfdemCloud::evolve(Foam::GeometricField&, Foam::GeometricField, Foam::fvPatchField, Foam::volMesh>&, Foam::GeometricField, Foam::fvPatchField, Foam::volMesh>&) at ~/OpenFOAM/cfd-1.7.1/src/lagrangian/cfdemParticle/cfdemCloud/cfdemCloud.C:371
[1] #7
[1] at ~/OpenFOAM/cfd-1.7.1/applications/solvers/cfdemSolverPiso_shared/cfdemSolverPiso.C:80
[1] #8 __libc_start_main in "/lib/tls/i686/cmov/libc.so.6"
[1] #9
[1] in "/home/cfd/OpenFOAM/cfd-1.7.1/applications/bin/linuxGccDPDebug/cfdemSolverPiso_shared"
--------------------------------------------------------------------------
MPI_ABORT was invoked on rank 1 in communicator MPI_COMM_WORLD
with errorcode 1.

NOTE: invoking MPI_ABORT causes Open MPI to kill all MPI processes.
You may or may not see output from other processes, depending on
exactly when Open MPI kills them.
--------------------------------------------------------------------------
--------------------------------------------------------------------------
mpirun has exited due to process rank 1 with PID 27582 on
node ubuntu exiting without calling "finalize". This may
have caused other processes in the application to be
terminated by signals sent by mpirun (as reported here).
--------------------------------------------------------------------------

Tue, 28 Feb 2012 - 13:37 Permalink
cgoniva

In reply to by anonymous_stub (not verified)

Hi!

Did you try the installation for an other OF version also?
You could try to go for 1.7.x or 2.0.x?

Cheers,
Chris

Fri, 2 Mar 2012 - 11:56 Permalink

Hi,
I'm new to liggghts and CFDEM. I've just installed liggghts and CFDEM according to setup_LIGGGHTS__OpenFoamR_CFDEM_2p0_on_Ubuntu1004_24052011.txt, and that's OK.

So, I try to run the example case, settlingTestMPI. However, it failed and it showed "FOAM Fatal Error":

[1] --> FOAM FATAL ERROR:
[1] index -1 out of range 0 ... 3999
[1]
[1] From function UList::checkIndex(const label)
[1] in file /home/cfd/OpenFOAM/OpenFOAM-1.7.1/src/OpenFOAM/lnInclude/UListI.H at line 109.
[1]
FOAM parallel run aborting
[1]
[1] #0 Foam::error::printStack(Foam::Ostream&) at ~/OpenFOAM/OpenFOAM-1.7.1/src/OSspecific/POSIX/printStack.C:202
[1] #1 Foam::error::abort() at ~/OpenFOAM/OpenFOAM-1.7.1/src/OpenFOAM/lnInclude/error.C:230
[1] #2 Foam::Ostream& Foam::operator<< (Foam::Ostream&, Foam::errorManip) at ~/OpenFOAM/OpenFOAM-1.7.1/src/OpenFOAM/lnInclude/errorManip.H:86
[1] #3 Foam::UList::checkIndex(int) const at ~/OpenFOAM/OpenFOAM-1.7.1/src/OpenFOAM/lnInclude/UListI.H:113
[1] #4 Foam::UList::operator[](int) const at ~/OpenFOAM/OpenFOAM-1.7.1/src/OpenFOAM/lnInclude/UListI.H:172
[1] #5 Foam::Archimedes::setForce(double** const&, double**&, double**&, double**&) const at ~/OpenFOAM/cfd-1.7.1/src/lagrangian/cfdemParticle/subModels/forceModel/Archimedes/Archimedes.C:118
[1] #6 Foam::cfdemCloud::evolve(Foam::GeometricField&, Foam::GeometricField, Foam::fvPatchField, Foam::volMesh>&, Foam::GeometricField, Foam::fvPatchField, Foam::volMesh>&) at ~/OpenFOAM/cfd-1.7.1/src/lagrangian/cfdemParticle/cfdemCloud/cfdemCloud.C:371
[1] #7
[1] at ~/OpenFOAM/cfd-1.7.1/applications/solvers/cfdemSolverPiso_shared/cfdemSolverPiso.C:80
[1] #8 __libc_start_main in "/lib/tls/i686/cmov/libc.so.6"
[1] #9
--------------------------------------------------------------------------
MPI_ABORT was invoked on rank 1 in communicator MPI_COMM_WORLD
with errorcode 1.

NOTE: invoking MPI_ABORT causes Open MPI to kill all MPI processes.
You may or may not see output from other processes, depending on
exactly when Open MPI kills them.
--------------------------------------------------------------------------
[1] in "/home/cfd/OpenFOAM/cfd-1.7.1/applications/bin/linuxGccDPDebug/cfdemSolverPiso_shared"
--------------------------------------------------------------------------
mpirun has exited due to process rank 1 with PID 27832 on
node ubuntu exiting without calling "finalize". This may
have caused other processes in the application to be
terminated by signals sent by mpirun (as reported here).
--------------------------------------------------------------------------

The complete screen output is also attached.
What should I do than?