| Attachment | Size |
|---|---|
| particle_under_compression.png | 841.68 KB |
| force_chain_line.png | 362.44 KB |
| force_chain_width.png | 550.15 KB |
Hi All,
I has a liggghts compression code and want to visulaize force chain in paraview. To visulaize force chain, I used these two command lines ("compute_pair_gran_local.cpp" and "dump_local_gran_vtk.cpp").
But I have a issue that force chain cross the simulation domain along x and y direction (see attached pictures). Boundary condition is periodical along x an y direction. There are two walls along z direction. Top wall move down along z direction to create compression.
Could anyone know the reason of this issue and help me solve this issue?
I am wondering if these source codes "compute_pair_gran_local.cpp" and "dump_local_gran_vtk.cpp" are able to avoid force lines that cross the simulation domain along the periodic boundary?
Thank you in advance!
Best wishes,
chrisqian
Have you solve this problem?
Hi chrisqian,
More than half a year has passed since your question, do you have any solutions to this problem?
In my research, I also need to use periodic boundary conditions, and I also encountered the same problem as you. As for my guess, this phenomenon is caused by the fact that some aggregates are still at the end when a aggregate returns from the end to the initial end, but I do not know how to solve it. If you have a good solution now, would you please give me some suggestions.
Looking forward to your reply!
Sincerely,
Salieri