Please! particles are falling out of the domain and lost.

Submitted by Sang on
mschramm

Hello,
The stl files used in cad2 and cad3 are not being simulated as they were not part of your granwalls fix. Since you have 3 geometries, the command should be
fix granwalls all wall/gran model hertz tangential history mesh n_meshes 3 meshes cad1 cad2 cad3

Also, for your simulation domain, LIGGGHTS is enclosing your region inside a box. Only the region type 'prism' is treated differently.

Mon, 18 Jul 2022 - 17:16 Permalink

Hello everyone,
I am learning how to do simulations by Liggghts. Now, I want two kinds of powders to fall onto the bottom of the domain. But it showed that my particles directly went across the domain and disappeared. I tried to decrease my time step to 1/10, but the problem was still unfixed. Could anyone please help me to deal with this problem? The input script is below. Thanks very much for your help.

atom_style sphere
boundary f f f
newton off
atom_modify map array

communicate single vel yes
units si

processors 2 1 2

region domain cylinder y 0.0 0.0 0.055 0.0 0.085 units box

create_box 2 domain

#read_restart restart/dump1.restart

neighbor 0.0002 bin
neigh_modify delay 0

#Material properties required for new pair styles

fix m1 all property/global youngsModulus peratomtype 1.e9 3.e8
fix m2 all property/global poissonsRatio peratomtype 0.3 0.23
fix m3 all property/global coefficientRestitution peratomtypepair 2 0.64 0.68 0.68 0.64
fix m5 all property/global characteristicVelocity scalar 1.
fix m6 all property/global cohesionEnergyDensity peratomtypepair 2 1.e4 2.e4 2.e4 1.e4
fix m4 all property/global coefficientFriction peratomtypepair 2 0.01 0.05 0.05 0.01
fix m7 all property/global coefficientRollingFriction peratomtypepair 2 0.6 0.8 0.8 0.6

#New pair style
pair_style gran model hertz tangential history cohesion sjkr rolling_friction epsd2
pair_coeff * *

timestep 0.000000001

fix 1 all nve/sphere
fix 2 all gravity 9.81 vector 0.0 -1.0 0.0

#import triangular mesh
fix cad1 all mesh/surface file mesh3/Tmesh1.stl type 1 scale 0.001
fix cad2 all mesh/surface file mesh3/Cmesh2.stl type 1 scale 0.001
fix cad3 all mesh/surface file mesh3/Pmesh3.stl type 1 scale 0.001

#use the imported mesh as granular wall
fix granwalls all wall/gran model hertz tangential history mesh n_meshes 1 meshes cad1

#move the cap
#fix movecad all move/mesh mesh cad1 linear 0.0 0.02 0.0

#group
group nve_group region domain

#distributions for insertion
fix pts1 all particletemplate/sphere 10007 atom_type 1 density constant 7800 radius constant 0.00015
fix pts2 all particletemplate/sphere 10009 atom_type 1 density constant 7800 radius constant 0.00021
fix pts3 all particletemplate/sphere 10037 atom_type 1 density constant 7800 radius constant 0.000285
fix pts4 all particletemplate/sphere 10039 atom_type 1 density constant 7800 radius constant 0.000345
fix pts5 all particletemplate/sphere 10061 atom_type 2 density constant 3200 radius constant 0.00015
fix pts6 all particletemplate/sphere 10067 atom_type 2 density constant 3200 radius constant 0.00021
fix pts7 all particletemplate/sphere 10069 atom_type 2 density constant 3200 radius constant 0.000285
fix pts8 all particletemplate/sphere 10079 atom_type 2 density constant 3200 radius constant 0.000345
###############

fix pdd1 all particledistribution/discrete/numberbased 10091 8 pts1 0.35 pts2 0.35 pts3 0.15 pts4 0.05 pts5 0.045 pts6 0.035 pts7 0.015 pts8 0.005

#region and insertion
region bc cylinder y 0.0 0.0 0.0048 0.05 0.078 units box

#region bc cone y 0.0 0.0 0.005 0.04 0.01 0.08

#region bc block -0.048 0.048 0.0005 0.09 -0.048 0.048

#fix bc all mesh/surface file meshes/platform.stl type 1 move 0. -12. 0. scale 0.08

#particle insertion

fix ins all insert/pack seed 10093 distributiontemplate pdd1 vel constant 0. -1.0 0. &
insert_every once overlapcheck yes region bc ntry_mc 10000 particles_in_region 5000

fix ts all check/timestep/gran 1000 0.1 0.1

compute 1 all erotate/sphere

compute VoroRadius all property/atom radius
variable r2 atom c_VoroRadius
compute voro all voronoi/atom radius v_r2

thermo_style custom step atoms ke c_1 f_ts[1] f_ts[2] vol
thermo 1000
thermo_modify lost ignore norm no

#dump commands
run 1
#

dump dmp all custom 100000 post/die_*.dump id type type x y z ix iy iz vx vy vz fx fy fz omegax omegay omegaz radius
dump dmpstl all mesh/stl 100000 post/dump*.stl

#insert particles
run 50000000

write_dump all custom post-dump/1.dump id type x y z radius

write_restart restart/dump1.restart