Assertion Failed Error with periodic Boundary

Submitted by berlinphoenix on
David Thomas

Hi,

I too experience "Assertion error" when simulating using periodic boundary condition. Simulation runs fine with fixed boundary condition. The log file content (with echo both flag) with error is as follows:

hard_particles yes

communicate single vel yes
processors * * *

units si

region reg block -0.002e-2 1.56e-2 0 0.08e-2 -0.02e-2 0.430e-2 units box
#create_box 2 reg
read_restart restart.fillone3
Reading restart file ...
version 3 8
WARNING: Restart file used different # of processors (../read_restart.cpp:574)
orthogonal box = (-2e-05 0 -0.0002) to (0.0156 0.0008 0.0043)
1 by 1 by 1 MPI processor grid
WARNING:
The contact model you specified is not located in any whitelist.
Because of this the model will be run in an unoptimized version (increasing runtime by up to 20%).
In order to optimize this model you have the following options:
(i) Run the genAutoExamplesWhitelist.sh script in your LIGGGHTS(R) source folder to automatically parse the input script
(ii) Add the model combination by hand to your style_contact_model_user.whitelist that can be found in your LIGGGHTS(R) source folder
If you perform one of the steps above LIGGGHTS(R) needs to be recompiled to generate the optimized code.

(../contact_models.h:364)
30000 atoms

neighbor 50e-6 bin
neigh_modify delay 0 one 5000

fix m1 all property/global youngsModulus peratomtype 3e9 210e9
fix m2 all property/global poissonsRatio peratomtype 0.3 0.3
fix m3 all property/global coefficientRestitution peratomtypepair 2 0.5 0.5 0.5 0.5
fix m4 all property/global coefficientFriction peratomtypepair 2 0.5 0.5 0.5 0.5
fix m5 all property/global coefficientRollingFriction peratomtypepair 2 0.1 0.1 0.1 0.1
fix m6 all property/global HamakerConstant scalar 0.1e-20
fix m7 all property/global maxSurfaceDistance scalar 1e-6
fix m8 all property/global minSurfaceDistance scalar 1.65e-10
fix m9 all property/global userConstantDistfactor scalar 2

#New pair style
pair_style gran model hertz tangential history cohesion vdw3 rolling_friction cdt
WARNING:
The contact model you specified is not located in any whitelist.
Because of this the model will be run in an unoptimized version (increasing runtime by up to 20%).
In order to optimize this model you have the following options:
(i) Run the genAutoExamplesWhitelist.sh script in your LIGGGHTS(R) source folder to automatically parse the input script
(ii) Add the model combination by hand to your style_contact_model_user.whitelist that can be found in your LIGGGHTS(R) source folder
If you perform one of the steps above LIGGGHTS(R) needs to be recompiled to generate the optimized code.

(../contact_models.h:364)
pair_coeff * *

timestep 1e-8

fix gravi all gravity 9.81 vector 0.0 0.0 -1.0

fix cad1 all mesh/surface file meshes/container.stl type 1 scale 0.002e-2 curvature 1e-5
INFO: mesh file (meshes/container.stl) is required, but data will be taken from restart file (../fix_mesh.cpp:417)
Resetting global state of Fix cad1 Style mesh/surface from restart file info

fix granwalls all wall/gran model hertz tangential history mesh n_meshes 1 meshes cad1
Resetting global state of Fix n_neighs_mesh_cad1 Style property/atom from restart file info
Resetting per-atom state of Fix n_neighs_mesh_cad1 Style property/atom from restart file info
Resetting global state of Fix tracker_cad1 Style contacthistory/mesh from restart file info
Resetting per-atom state of Fix tracker_cad1 Style contacthistory/mesh from restart file info

unfix granwalls
unfix cad1

fix cad3 all mesh/surface file meshes/p_bed.stl type 1 precision 1e-12 element_exclusion_list read blacklist_combase.txt scale 0.002e-2 curvature 1e-5

Reading STL file 'meshes/p_bed.stl' (mesh processing step 1/3)
fix cad4 all mesh/surface file meshes/layering_base.stl type 1 scale 0.002e-2 move 0 0 -69.6e-6 curvature 1e-5

Reading STL file 'meshes/layering_base.stl' (mesh processing step 1/3)
fix cad5 all mesh/surface file meshes/left_blade_NF.stl type 1 scale 0.002e-2 curvature 1e-5

Reading STL file 'meshes/left_blade_NF.stl' (mesh processing step 1/3)

fix granwalls all wall/gran model hertz tangential history mesh n_meshes 3 meshes cad3 cad4 cad5

#apply nve integration to all particles
fix integr all nve/sphere

#output settings, include total thermal energy
compute rke all erotate/sphere
thermo_style custom step atoms ke c_rke vol
thermo 5000
thermo_modify lost ignore norm no

# Check time step and initialize dump file
fix ctg all check/timestep/gran 1 0.01 0.01
run 1
Resetting global state of Fix contacthistory Style contacthistory from restart file info
Resetting per-atom state of Fix contacthistory Style contacthistory from restart file info
Setting up run at Wed Nov 10 16:34:03 2021

ERROR on proc 0: assertion failed (../region_neighbor_list_I.h:165)
--------------------------------------------------------------------------
MPI_ABORT was invoked on rank 0 in communicator MPI_COMM_WORLD
with errorcode 1.

NOTE: invoking MPI_ABORT causes Open MPI to kill all MPI processes.
You may or may not see output from other processes, depending on
exactly when Open MPI kills them.

Thank you,
Thomas.

Wed, 10 Nov 2021 - 12:12 Permalink

Hello,

i get the Assertion Error, when i want to simulate on periodic boundary dircetion. If i set all boundaries to fff it works fine. Only when i set ffp, it throws me the error. Can anybody hint me wo where this comes from?

Thanks a lot for your help!