Dear all, I have a really basic question regarding the settlingTestMPI tutorial. As far as I understand it simulates the settling of a sphere in a still fluid and compares the simulation results with the analytical Stokes (creeping flow) solution. But I can't find a reference (paper) of the expressions used in the .m scrip. I understand that It performs and explicit integration of the position but I cannot find a reference of the velocity determination.
I've attached bellow the octave script.
Cheers,
Mauro
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
%
close all;
clear;
clc;
%====================================%
% simulation data
%====================================%
path = '../../DEM/post/velocity.txt';
data = load(path);
U_sim = data(:,2:4);
t_sim = data(:,1);
fprintf('final velocity of sim = %f/%f/%f m/s\n',U_sim(length(U_sim(:,1)),1),U_sim(length(U_sim(:,1)),2),U_sim(length(U_sim(:,1)),3) )
%====================================%
U_=0
X_=0
dt=0.001
tEnd=0.2
nuc = 1e-05
rhoc = 10
d_ = 0.0001
rhop = 3000
g=9.81
Uc=0
%====================================%
% analytical calculation
%====================================%
count=1;
for t=0:dt:tEnd
count=count+1;
t_(count)=t;
magUr = (U_(count-1)-Uc);
ReFunc = 1.0;
Re = magUr*d_/nuc;
if Re > 0.01
ReFunc += 0.15*Re^0.687;
end
Dc = (24.0*nuc/d_)*ReFunc*(3.0/4.0)*(rhoc/(d_*rhop));
U_(count) = (U_(count-1) + dt*(Dc*Uc + (1.0 - rhoc/rhop)*g))/(1.0 + dt*Dc);
X_(count) = X_(count-1) + dt*U_(count);
Re_(count) = Re;
end
fprintf('final velociy = %f m/s\n',U_(length(U_)))
fprintf('final position = %f m\n',X_(length(X_)))
%====================================%
% plot data
%====================================%
figure(1)
plot(t_,U_, 'k--')
hold on
plot(t_sim,-U_sim(:,2),'rd-')
legend("analytical - Stokes","simulation - DiFelice?")
%print('cfdemSolverPiso_settlingTestMPI.eps','-deps2')
print -color "cfdemSolverPiso_settlingTestMPI.png"
%figure(2)
%plot(t_,X_)
%figure(3)
%plot(t_,Re_)
Dear all, I found an article
Dear all, I found an article by Nouri et. al. thas uses the Basset-Boussinesq-Ossen equation dropping the Basset force. But I still don't understand completely the octave script. Could you give me a hint?
- Don't understand the bold part on the drag coeff.
- How this integration is made? It's a standar linarization and explicit integration?
Dc = (24.0*nuc/d_)*ReFunc*(3.0/4.0)*(rhoc/(d_*rhop));
U_(count) = (U_(count-1) + dt*(Dc*Uc + (1.0 - rhoc/rhop)*g))/(1.0 + dt*Dc);
Reference: Nouri, R., Ganji, D. D., & Hatami, M. (2014). Unsteady sedimentation analysis of spherical particles in Newtonian fluid media using analytical methods. Propulsion and Power Research, 3(2), 96-105.
Regards,
Mauro
understanding SETTLINGTESTMPI
Hi! I have the same problem. I can't completely understand this tutorial. what are the axis legends of the final diagram? velocity/time or drag/time? is it a 4-way coupling or 2-way coupling?
Hi mbaldini,
Hi mbaldini,
Have you solved this problem? I'm also confused about this equation (stocks law) used in this tutorial. It seems that this equation is different with all I have found.
Your response would be appreciated.
Jacob