Hi Liggghts Forum,
I have a compressed box of particles. The top layer of the particles needs to be moved horizontally in one direction(+y), while the bottom layer in the opposite direction(-y).
I created two groups (edge & edge1) for the particles in the top and the bottom layer respectively. My command for moving the particles are:
fix edge all move linear 0.0 0.08 0.0 units box
fix edge1 all move linear 0.0 -0.08 0.0 units box
But, the problem is only the last line of move style is working, the first line is ignored. For example, if I use "fix edge" followed by "fix edge1", only the later is considered. If the order is reversed, only "fix edge" is considered.
How can I solve the problem, where both groups edge and edge1 could be considered while using fix move.
Thanks,
Sounik
change the group ID instead of fix ID
It looks like you have set your fix IDs to edge and edge1, respectively; however, you have the same group ID (i.e. all) for both fixes. If you want to apply a fix to the specific group of particles only, you need to change the group IDs in your fix.
I hope that works. Cheers