I have use superquadric atom style and particle template superquadric to run simulation of cubic particles with blockiness 15.Is it fine?
Also,i'm visualising it using paraview.I've added tensor glyph filter in it.In "Glyph type" option,which type should i use to view my cubic particles.
In paraview,while applying tensor glyph to my file..if i choose superquadric glyph type,then oblate are looking fine but cubic particles are looking like sphere..,and if choose Box glyph type,then cubic particles are fine but oblate also looks like cube.How to resolve this problem
The superquadric tensor glyph plugin is actually not intended (and most probably cannot be used properly) for the visualization of superquadric particles.
1st in input script use dump dmp all custom 1000 post/rigid*.dump id type x y z quat1 quat2 quat3 quat4 vx vy vz fx fy fz blockiness1 to dump superquadric data
2nd install Paraview 5.4.1 and Download rigid reader [1], add reader using tools->manage plugins->load new
3rd open ridid*.dump in paraview, select liggghts_rigid_reader
4th download python filter: https://www.cfdem.com/system/files/304_transform_sq_with_colors.xml__0… rename to 304_transform_sq_with_colors.xml and add to PV using tools->manage plugins
5th In PV create a source superquadric, roundness=2/blockiness, scale=ex,ey,ez, deselect Torodial
6th In the pipeline browser select rigid*.dump AND superquadric source (press ctrl+left click) and than append filters->304_transform_SQ_colored to both
This will draw a superqaudric with correct shape and orientation at every center point in rigid*.dump file.
Have a look at this pipeline to get an idea how it should look: https://www.cfdem.com/system/files/settings4pv_sq.png
i have done what you mentioned.still.,i could see only one superquadric particle in my screen.how can i link that feature to all the particles i have in my file
This blockiness is way too
This blockiness is way too high. We suggest not using a value higher than 16 (and even that is stretching it)
cubic particles using superquadric style; paraview visualization
I have use superquadric atom style and particle template superquadric to run simulation of cubic particles with blockiness 15.Is it fine?
Also,i'm visualising it using paraview.I've added tensor glyph filter in it.In "Glyph type" option,which type should i use to view my cubic particles.
In reply to cubic particles using superquadric style; paraview visualization by sadgi rawat
Hi,
Hi,
I would suggest to use blockiness not higher than 8. Such blockiness provides already 94% of volume approximation
In reply to cubic particles using superquadric style; paraview visualization by sadgi rawat
viz of superquadrics
See the following thread for how to visualise superquadric particles in Paraview:
https://www.cfdem.com/forums/how-visualize-superquadric
using cubic and oblate particles
In paraview,while applying tensor glyph to my file..if i choose superquadric glyph type,then oblate are looking fine but cubic particles are looking like sphere..,and if choose Box glyph type,then cubic particles are fine but oblate also looks like cube.How to resolve this problem
superquadric tensor glyph
The superquadric tensor glyph plugin is actually not intended (and most probably cannot be used properly) for the visualization of superquadric particles.
In reply to superquadric tensor glyph by Daniel Queteschiner
Then how can i visualise
Then how can i visualise cubic and oblate particles in a system..Any suggestions?
In reply to Then how can i visualise by sadgi rawat
ParaView Python Programmable Filter
see this thread: https://www.cfdem.com/forums/tutorial-4-superquadric-angle-repose-repre…
still not able to visualise.
still not able to visualise..can you be more specific on the steps i need to do to visulaise them.
p.s.- i"m new to LIGGGHTS
In reply to still not able to visualise. by sadgi rawat
short introduction
1st in input script use
dump dmp all custom 1000 post/rigid*.dump id type x y z quat1 quat2 quat3 quat4 vx vy vz fx fy fz blockiness1to dump superquadric data2nd install Paraview 5.4.1 and Download rigid reader [1], add reader using tools->manage plugins->load new
3rd open ridid*.dump in paraview, select liggghts_rigid_reader
4th download python filter: https://www.cfdem.com/system/files/304_transform_sq_with_colors.xml__0… rename to 304_transform_sq_with_colors.xml and add to PV using tools->manage plugins
5th In PV create a source superquadric, roundness=2/blockiness, scale=ex,ey,ez, deselect Torodial
6th In the pipeline browser select rigid*.dump AND superquadric source (press ctrl+left click) and than append filters->304_transform_SQ_colored to both
This will draw a superqaudric with correct shape and orientation at every center point in rigid*.dump file.
Have a look at this pipeline to get an idea how it should look:
https://www.cfdem.com/system/files/settings4pv_sq.png
[1] https://github.com/richti83/ParaView_Reader_for_LIGGGHTS/tree/master/pr…
In reply to short introduction by richti83
i have done what you
i have done what you mentioned.still.,i could see only one superquadric particle in my screen.how can i link that feature to all the particles i have in my file
In reply to i have done what you by sadgi rawat
Solved?
Have you solved this issue when you are trying to visualize the superquadric particles?