| Attachment | Size |
|---|---|
| log.txt | 20.62 KB |
| in_liggghts_initial.txt | 3.46 KB |
| in_liggghts_run.txt | 2.19 KB |
Forums
Hi everyone,
When I run the attached case (5200 CFD cells and 90000 DEM particles) in 12 processors for a day (around 1 second in simulation), it always exceeds the memory limitation, which is 45 G and should be sufficiently large.
I tried to change the neighbor and neigh_modify settings but it didn't work. I cannot figure out why the case consumes such a large memory.
Please could anyone help to identify the reason or let me know if I made any mistakes.
Liggghts files are attached.
Thanks!
Jason
Hi Jason,
Hi Jason,
it is a little hard to tell, but there are some things that come to my mind: first of all, the init script seems to use 24 processors and 2 periodic boundaries, while the second script uses 12 processors and only one periodic boundary. Imho the number of particles involved is not ideal for 12, let alone 24, processors. 4 or maybe 8 should be sufficient. While the different amount of processors should not be an issue, the periodic/non-periodic boundaries might be. Other factors that might have a bad influence on the calculation could be possibly large stl-files. Furthermore it seems that there is quite a high number of iterations necessary for solving the p-equation, which could point to numerical problems or problematic settings in fvSchemes or fvSolution...
Hope any of this helps!
Best regards,
Alice
In reply to Hi Jason, by alice
Hi Alice,
Hi Alice,
Thanks for your reply and helping me to find so many possible problems!
When I tried to decrease the number of processors to 4, it seemed getting better. But when the simulation ran around 6 seconds (5 times longer than before), same error happened again.
I can restart it and continue running. But I'd like to find out the reason of error, if possible.
For periodic boundary, how does periodic or non-periodic affect the memory usage?
For stl-files, does the "large" mean large area of the wall, or should I improve the stl settings?
For p-equation, I will the try to improve the grids and other related settings.
Thanks again!
Jason