Reading this error message from begin to end you find the first error:
/twoWayMPI.H:47:62: error: lammps.h: No such file or directory subModels/dataExchangeModel/twoWayMPI
so CFDEM cannot find the liggghts file lammps.h which most probably means that the liggghts path in cfdemParticle/etc/bashrc is not set correctly.
Dear Chris,
I checked liggghts path in cfdemParticle/etc/bashrc and I think is correct.
For further information , I have put my bashrc file below.
#----------------------------------*-sh-*--------------------------------------
# CFDEM
# Christoph Goniva
# April 2011
#------------------------------------------------------------------------------
# Script
# etc/bashrc
# Description
# Startup file for cfdem exporting environment variables
# Sourced ~/.bashrc
#------------------------------------------------------------------------------
#- LIGGGHTS source directory src
#export CFDEM_LIGGGHTS_SRC_DIR=$HOME/LIGGGHTS/liggghts_1p0p3/src
export CFDEM_LIGGGHTS_SRC_DIR=$HOME/sderakhshani/LIGGGHTS/liggghts_GIT/src
#- LIGGGHTS lib name
export CFDEM_LIGGGHTS_LIB_NAME=lmp_fedora_fpic
#- CFDEM coupling source directory src
export CFDEM_SRC_DIR=$FOAM_RUN/../src/lagrangian/cfdemParticle/
#- CFDEM lib name
export CFDEM_LIB_NAME=lagrangianCFDEM_shared
#- shortcut to src path
alias cfdem='cd $CFDEM_SRC_DIR'
#- PIZZA src directory
export CFDEM_PIZZA_DIR=$HOME/LAMMPS/pizza-16Mar09/src/
#- path to test harness
export CFDEM_TEST_HARNESS_PATH=$HOME/scripts/testCFDEM/logFiles
In addition , After activating new env vars with this command : . ~/.bashrc , I found that another bashrc file is on the following address: home/sderakhshani/CFDEM/cfdem_GIT/cfdemParticle/etc
But the addresses on this file had not edited !!!
First question: Should the content of this file change after using ". ~/.bashrc" or not ?
Second question: If yes , why has not changed this file ?
After producing this error I replaced the content of bashrc file (home/sderakhshani/CFDEM/cfdem_GIT/cfdemParticle/etc) with bashrc file (home/sderakhshani/OpenFOAM/sderakhshani-1.7.x/src/lagrangian/cfdemParticle/etc) and then saved it.
Then try again , the same error was produced again?
Hi Ebrahim,
the .bashrc file contains information about environment variables and pathes, the one in the etc-folder is included by one line in the .bashrc-file. As soon as you open a new terminal, the variables set there should be valid. (Check it out by e.g. typing "echo $CFDEM_SRC_DIR" to a terminal. If this yields the path defined in the /etc/bashrc, then you're good).
Cheers,
Alice
I want to thanks Alice and Chris for their useful advices.
In the bashrc file I had used the following address:
export CFDEM_LIGGGHTS_SRC_DIR=$HOME/sderakhshani/LIGGGHTS/liggghts_GIT/src
Then I used echo $CFDEM_LIGGGHTS_SRC_DIR and found the following address in the terminal:
/home/sderakhshani/sderakhshani/LIGGGHTS/liggghts_GIT/src
So I edited the address in bashrc file like below (I do not know why I should remove "user" from address):
export CFDEM_LIGGGHTS_SRC_DIR=$HOME/LIGGGHTS/liggghts_GIT/src
And then activate bashrc again and ...
Now by using echo $CFDEM_LIGGGHTS_SRC_DIR, I have :
/home/sderakhshani/LIGGGHTS/liggghts_GIT/src
The Error removed and I finally could run cfdem testcase.
Hi! Reading this error
Hi!
Reading this error message from begin to end you find the first error:
/twoWayMPI.H:47:62: error: lammps.h: No such file or directory subModels/dataExchangeModel/twoWayMPI
so CFDEM cannot find the liggghts file lammps.h which most probably means that the liggghts path in cfdemParticle/etc/bashrc is not set correctly.
Cheers,
Chris
In reply to by anonymous_stub (not verified)
Hi friends
Dear Chris,
I checked liggghts path in cfdemParticle/etc/bashrc and I think is correct.
For further information , I have put my bashrc file below.
#----------------------------------*-sh-*--------------------------------------
# CFDEM
# Christoph Goniva
# April 2011
#------------------------------------------------------------------------------
# Script
# etc/bashrc
# Description
# Startup file for cfdem exporting environment variables
# Sourced ~/.bashrc
#------------------------------------------------------------------------------
#- LIGGGHTS source directory src
#export CFDEM_LIGGGHTS_SRC_DIR=$HOME/LIGGGHTS/liggghts_1p0p3/src
export CFDEM_LIGGGHTS_SRC_DIR=$HOME/sderakhshani/LIGGGHTS/liggghts_GIT/src
#- LIGGGHTS lib name
export CFDEM_LIGGGHTS_LIB_NAME=lmp_fedora_fpic
#- CFDEM coupling source directory src
export CFDEM_SRC_DIR=$FOAM_RUN/../src/lagrangian/cfdemParticle/
#- CFDEM lib name
export CFDEM_LIB_NAME=lagrangianCFDEM_shared
#- shortcut to src path
alias cfdem='cd $CFDEM_SRC_DIR'
#- PIZZA src directory
export CFDEM_PIZZA_DIR=$HOME/LAMMPS/pizza-16Mar09/src/
#- path to test harness
export CFDEM_TEST_HARNESS_PATH=$HOME/scripts/testCFDEM/logFiles
In addition , After activating new env vars with this command : . ~/.bashrc , I found that another bashrc file is on the following address: home/sderakhshani/CFDEM/cfdem_GIT/cfdemParticle/etc
But the addresses on this file had not edited !!!
First question: Should the content of this file change after using ". ~/.bashrc" or not ?
Second question: If yes , why has not changed this file ?
After producing this error I replaced the content of bashrc file (home/sderakhshani/CFDEM/cfdem_GIT/cfdemParticle/etc) with bashrc file (home/sderakhshani/OpenFOAM/sderakhshani-1.7.x/src/lagrangian/cfdemParticle/etc) and then saved it.
Then try again , the same error was produced again?
Third question: why is your suggestion ?
Thanks in advanse,
Best regards,
Ebrahim
#----------------------------------*-sh-*--------------------------------------
# CFDEM
# Christoph Goniva
# April 2011
#------------------------------------------------------------------------------
#
# Script
# etc/bashrc
#
# Description
# Startup file for cfdem exporting environment variables
# Sourced ~/.bashrc
#
#------------------------------------------------------------------------------
#- LIGGGHTS source directory src
#export CFDEM_LIGGGHTS_SRC_DIR=$HOME/LIGGGHTS/liggghts_1p0p3/src
export CFDEM_LIGGGHTS_SRC_DIR=$HOME/sderakhshani/LIGGGHTS/liggghts_GIT/src
#- LIGGGHTS lib name
export CFDEM_LIGGGHTS_LIB_NAME=lmp_fedora_fpic
#- CFDEM coupling source directory src
export CFDEM_SRC_DIR=$FOAM_RUN/../src/lagrangian/cfdemParticle/
#- CFDEM lib name
export CFDEM_LIB_NAME=lagrangianCFDEM_shared
#- shortcut to src path
alias cfdem='cd $CFDEM_SRC_DIR'
#- PIZZA src directory
export CFDEM_PIZZA_DIR=$HOME/LAMMPS/pizza-16Mar09/src/
#- path to test harness
export CFDEM_TEST_HARNESS_PATH=$HOME/scripts/testCFDEM/logFiles
In reply to by anonymous_stub (not verified)
Hi Ebrahim, the .bashrc file
Hi Ebrahim,
the .bashrc file contains information about environment variables and pathes, the one in the etc-folder is included by one line in the .bashrc-file. As soon as you open a new terminal, the variables set there should be valid. (Check it out by e.g. typing "echo $CFDEM_SRC_DIR" to a terminal. If this yields the path defined in the /etc/bashrc, then you're good).
Cheers,
Alice
In reply to by anonymous_stub (not verified)
Hi Thank you Alice. I checked
Hi
Thank you Alice.
I checked all paths by echo command. All of them were correct and were like /etc/bashrc. But error still remains !!!
Do you have any new idea ?
With very best regards,
Ebrahim
In reply to by anonymous_stub (not verified)
Hi!Please check whatlocate
Hi!
Please check what
locate lammps.h
gives.
When executing wmake libso this path should be among those paths the compiler is looking for *.h files.
It should be the same path as echo $CFDEM_LIGGGHTS_SRC_DIR .
Cheers,
Chris
In reply to by anonymous_stub (not verified)
Thanks every one
Hello friends,
I want to thanks Alice and Chris for their useful advices.
In the bashrc file I had used the following address:
export CFDEM_LIGGGHTS_SRC_DIR=$HOME/sderakhshani/LIGGGHTS/liggghts_GIT/src
Then I used echo $CFDEM_LIGGGHTS_SRC_DIR and found the following address in the terminal:
/home/sderakhshani/sderakhshani/LIGGGHTS/liggghts_GIT/src
So I edited the address in bashrc file like below (I do not know why I should remove "user" from address):
export CFDEM_LIGGGHTS_SRC_DIR=$HOME/LIGGGHTS/liggghts_GIT/src
And then activate bashrc again and ...
Now by using echo $CFDEM_LIGGGHTS_SRC_DIR, I have :
/home/sderakhshani/LIGGGHTS/liggghts_GIT/src
The Error removed and I finally could run cfdem testcase.
Thank you again from Chris and Alice.
Cheers,
Ebrahim