Forums
Hi everyone,
the case I am simulating consists of a bunch of particles stirred in a tank. The geometry of the stirrer is available in stl format.
I would like to calculate the torque exerted on the stirrer or the axle moving it, respectively. I've played around with fix mesh/gran/stressanalysis and its capabilities are almost what I need. Is there a way in liggghts to integrate the stresses such that I get the resulting torque on the axle?
Thanks for any comments.
Best regards,
Moritz
Hi Moritz, the torque on the
Hi Moritz,
the torque on a mesh (such as the stirrer) is available directly as the output of the fix mesh/gran/stressanalysis command. Its doc says: This fix stores a global vector with 6 components for access by various output commands. The first 3 components are equal to the total force on the mesh, the last 3 components store the total torque on the body exerted by the particles.
Cheers,
Christoph
In reply to by anonymous_stub (not verified)
Hi Christoph, thanks for the
Hi Christoph,
thanks for the quick reply! ... wer lesen kann, ist klar im Vorteil.
Best regards,
Moritz
In reply to by anonymous_stub (not verified)
how to dump total force and torque
Hi Christoph,
I've a similar problem to dump the total force and torque of a mesh.
I added stressanalysis to the import mesh fix
fix screw_pos all mesh/gran/stressanalysis stl/screw+x.stl 1 0.001 0. 0. 0. 0. 0. 0.
fix screw_neg all mesh/gran/stressanalysis stl/screw-x.stl 1 0.001 0. 0. 0. 0. 0. 0.
and I'm able to dump into vtk file this was:
dump dump_stress0 all mesh/gran/VTK 250 post/Stress_file-*.vtk stress screw_pos screw_neg
It seems the stress is assigned to the triangles of the mesh. But how can I dump the total values of the global vector you mentioned ?
I tried:
dump wall_stress all custom 100 post/wall_dump*.txt f_screw_pos to access the fix directly but got an error "Dump custom fix does not compute per-atom info"
thank you,
Christian
In reply to by anonymous_stub (not verified)
you can use the fix print
you can use the fix print command for this - as mentioned above, the torque is a direct output of fix mesh/gran/stressanalysis
Christoph
In reply to by anonymous_stub (not verified)
sorry ...
Finaly I got it,
to all who are interested in: use
fix force_pos all ave/time 1 1 250 f_screw_pos[1] f_screw_pos[2] f_screw_pos[3] f_screw_pos[4] f_screw_pos[5] f_screw_pos[6] file post/force_on_screw_pos.txt
fix force_neg all ave/time 1 1 250 f_screw_neg[1] f_screw_neg[2] f_screw_neg[3] f_screw_neg[4] f_screw_neg[5] f_screw_neg[6] file post/force_on_screw_neg.txt
to dump the vector at specific timesteps:-)
I was a little bit confused of dump and fix styles.
Have a nice day,
Christian