| Attachment | Size |
|---|---|
| data.system3.txt | 41.88 KB |
| in.txt | 1.98 KB |
Forums
Hi all,
i'm trying to reproduce a rotary kiln with two different form of particles, rectangular and spherical,
my problem is that when I try to change the neighbor from nsq to bin it gives me a segmentation fault,
I've saw that the problem is probably related to the neighbor bin, which I have to select when I add triangular meshes. Someone knows how to solve this?
Regards,
Not totally sure I understand
Not totally sure I understand your setup, but are you trying to insert the baffles after you've already generated particles? If so, are you certain that the baffles aren't being inserted in such a way that they intersect with existing particles, which would cause a blowout?
Regards,
Chris
no i'm pretty sure this doesn
no i'm pretty sure this doesn't happen, because i've tried without the mesh and it gives the same error:
[clusterlsgc02:08425] *** Process received signal ***
[clusterlsgc02:08425] Signal: Segmentation fault (11)
[clusterlsgc02:08425] Signal code: Address not mapped (1)
[clusterlsgc02:08425] Failing at address: 0x2b962c0b0f0c
[clusterlsgc02:08425] [ 0] /lib64/libpthread.so.0 [0x337140eb10]
[clusterlsgc02:08425] [ 1] liggghts_test(_ZN9LAMMPS_NS8Neighbor9bin_atomsEv+0x53b) [0x82387b]
[clusterlsgc02:08425] [ 2] liggghts_test(_ZN9LAMMPS_NS8Neighbor22granular_bin_no_newtonEPNS_9NeighListE+0x33) [0x832f53]
[clusterlsgc02:08425] [ 3] liggghts_test(_ZN9LAMMPS_NS8Neighbor5buildEv+0x3b1) [0x828631]
[clusterlsgc02:08425] [ 4] liggghts_test(_ZN9LAMMPS_NS6Verlet3runEi+0x146) [0xa373b6]
[clusterlsgc02:08425] [ 5] liggghts_test(_ZN9LAMMPS_NS3Run7commandEiPPc+0x50b) [0x9e9aeb]
[clusterlsgc02:08425] [ 6] liggghts_test(_ZN9LAMMPS_NS5Input15execute_commandEv+0xefc) [0x7c984c]
[clusterlsgc02:08425] [ 7] liggghts_test(_ZN9LAMMPS_NS5Input4fileEv+0x34a) [0x7cb0ea]
[clusterlsgc02:08425] [ 8] liggghts_test(main+0x4a) [0x7dce9a]
[clusterlsgc02:08425] [ 9] /lib64/libc.so.6(__libc_start_main+0xf4) [0x337081d994]
[clusterlsgc02:08425] [10] liggghts_test(__gxx_personality_v0+0x359) [0x4b6899]
[clusterlsgc02:08425] *** End of error message ***
Regards,
I have attached a simpler
I have attached a simpler input file
Hi Riccardo,
Hi Riccardo,
seems you are using an old version of LIGGGHTS. Please try with 3.X and let me know if the error persists!
Christoph
Hi Cristoph,
Hi Cristoph,
that was my fault, I didn't saw that there were some particles in my data file who had the same coordinate of the mesh, I didn't realize it immediately because my mesh is a bit complicated,
thanks for the asistance,
Riccardo