Hi all,
I am new to LIGGGHTS. After modifying the .stl file, I am getting the following error just after the code executes the fix command:
"fix cad1 all mesh/surface file screw.stl type 2 scale 1.0 curvature 1e-05
ERROR: Input line quote not followed by whitespace"
My script was working fine just with the old STL. Also, there is no problem in the new STL, as I used that in my earlier scripts.
Any ideas on what might be the reason behind this??
Thanks & Regards,
Aashish
ckloss | Mon, 01/25/2016 - 22:27
Hi Aashish,
Hi Aashish,
I think you might just have messed up the file? Try using e.g. the "meld" diff editor to check out what changes you did - you can try to debug line by line
Best wishes
Christoph
zhang947 | Fri, 02/05/2016 - 07:28
Try to save your stl in ascii format
Hi, Aashish,
It is probably you saved your .stl file in binary. Save it as ascii and try it again.
Good luck.
Jing
aquinolarosa | Mon, 04/11/2016 - 13:14
thanks you
thank you for posting this, I was getting the same error msg and followed your advise and now my script is running.
aaigner | Wed, 03/02/2016 - 17:50
Is the quote sign intended at
Is the quote sign intended at the beginning of your line?
"fix cad1 all mesh/surface file screw.stl type 2 scale 1.0 curvature 1e-05
Bests
Andreas